DIY New York Giants Football Bling Hotfix Transfer! Easy iron-on spangle bling design for shirts, sweatshirts & hoodies, bags, and more. Perfect for sparkle game day or custom apparel!

Detailed Instructions:

1. Prepare the Garment:

Pre-press your garment to remove any wrinkles or moisture.
2. Position the Transfer:

Peel the white backing from the spangle transfer and align it on your garment. Ensure the adhesive side of the transfer is facing down.
3. Set the Heat Press:

Set the heat press to the recommended temperature (typically around 280-325°F) and adjust the pressure for your specific heat press.
4. Press the Transfer:

Apply the heat and pressure for the recommended time (e.g., 10-15 seconds).
5. Cool and Peel:

Let the design cool slightly before peeling the transfer paper. Peel warm (not hot or cold) to ensure the spangles adhere properly.
6. Final Press (Optional):

For better adhesion, you can press the design again for a shorter time (e.g., 5-6 seconds).
7. Troubleshooting:

If any spangles come off during the peel, you can re-place them using tweezers and re-press them briefly.

Additional Tips:

Use a Teflon sheet or unwaxed parchment paper on top of the transfer during pressing to protect the fabric.
Test the pressing time and pressure on a scrap piece of fabric before applying it to your garment.
Some spangle transfers may require a second press after peeling to ensure proper adhesion.

Sports Transfers